Jam Solution: J-3120 Follow
Jam Code:
J-3120
Classification:
Main Body: Duplex Section
Cause:
During operation: Prints 11x17 but Jams on 8.5x11
(When a paper is fed from the PF-707m.) When the fusing paper exit sensor (PS22) becomes active, the preregistration sensor (PS18) of the PF-707m does not become inactive.
(During the back side output in the double sided mode)
When PS22 becomes active, the ADU pre-registration sensor (PS4) does not become inactive.
Solution:
- Replaced all four clutches in Duplex unit CL6/CL7/CL8/CL9