Error Code: C-2222 Follow

Classification
Main body: Toner bottle motor abnormality
 

Cause
When the toner bottle motor (M15) is active, an error detection signal is detected continuously for a specified period of time.
 

Measures to take when an alert occurs
The main body and the option stop immediately.
 

Estimated abnormal parts
• Printer control board (PRCB)
• Toner bottle motor (M15)
• DC power supply/2 (DCPS2)
 

Solution
1. Check that the toner bottle door is closed properly, and repair it when there is any abnormality.
2. Check the IO Check (01-00) and others of the M15 and the coupling of the gear. Then repair or replace it when there is any abnormality. (Wiring diagram: Main body (2/5): 16-B)
Note
▪ The output check on the IO check mode has restrictive conditions. Check the IO check mode list before the output check.
3. Check the connector connection between DCPS2 and M15, and the wiring. Then repair it when there is any abnormality.
4. Check the connector connection between DCPS2 and PRCB, and the wiring. Then repair it when there is any abnormality.
5. Replace M15.
6. Replace PRCB.
7. Replace DCPS2.