Error Code: C-0101 Follow

Classification
Main body: Paper feed motor abnormality

Cause
When the paper feed motor/Up (M11) is active, an error detection signal of M11 is detected continuously for a specified period of time.

Measures to take when an alert occurs
The main body and the option stop immediately.

Estimated abnormal parts
• DC power supply/2 (DCPS2)
• Printer control board (PRCB)
• Paper feed motor/Up (M11)
 

Solution
1. Check that the front door is closed properly, and repair it when there is any abnormality.
2. Check the connector connection between M11 and PRCB, and the wiring. Then repair it when there is any abnormality.
3. Check the connector connection between M11 and DCPS2, and the wiring. Then repair it when there is any abnormality.
4. Check the IO Check (28-00) drive of M11 and the coupling of the gear, and repair it when there is any abnormality. (Wiring diagram: Main
body (2/5): 4-N)
5. Replace M11.
6. Replace PRCB.
7. Replace DCPS2.