Error Code: C-0213 Follow

Classification
Main body: Paper exit abnormality

Cause
Within a specified period of time after the paper exit pressure home sensor (PS28) becomes inactive, it does not become active.

Measures to take when an alert occurs
The main body and the option stop immediately.

Estimated abnormal parts
• Printer control board (PRCB)
• Paper exit motor (M30)
• Paper exit pressure home sensor (PS28)

Solution
1. Check the de-curler unit, and clean or repair it when there is any abnormality.
2. Check the paper exit drive gear system, and clean or repair it when there is any abnormality.
3. Check the connector connection and the wiring between PRCB and PS28, and repair it when there is any abnormality.
4. Check the connector connection and the wiring between PRCB and M30, and repair it when there is any abnormality.
5. Check IO Check (27-31) and others and the operation of PS28, and repair or replace it when there is any abnormality. (Wiring diagram: Main body (2/5): 11-I)
6. Check IO Check (27-20) and others of M30 or the coupling of the gear, and repair or replace it when there is any abnormality. (Wiring diagram: Main body (2/5): 13-I)
7. Replace PS28.
8. Replace M30.
9. Replace PRCB.