Error Code: C-0215 Follow

Classification
PF: PF-707m paper lift motor abnormality
 

Cause
Power supply line fuse for the paper lift motor/3 (M9) blows out.
 

Measures to take when an alert occurs
The main body and the option stop immediately.
 

Estimated abnormal parts
• PF drive board (PFUDB)
• Paper lift motor/3 (M9)
 

Correction
Press the help key to activate and deactivate the sub power switch (SW2) of the main body.
Note
▪ When you isolate the faulty part, the limited use is available.
▪ The message "Please call service" and "Press [Help] to disengage" are displayed alternately on the touch panel.
▪ When you press the help key, the message "Please turn on power again" is displayed on the touch panel.
 

Solution
1. Check the connector connection between PFUDB and M9 and the wiring. Then repair it when there is any abnormality.
2. Check the IO Check (23-14) of M9 and the coupling of the gear, and repair or replace it when there is any abnormality. Then replace PFUDB (Wiring diagram: PF (1/2): 16-M)
3. Replace M9 and PFUDB at a time.
 

Faulty part isolation DIPSW
DIPSW35-2
Control during the detachment
Paper feed in PF lower tray is unavailable