Error Code: C-1005 Follow
Classification
FS or OT: FS-532 or OT-512
Cause
Communication error.
Measures to take when an alert occurs
The main body and the option stop immediately.
Estimated abnormal parts
- Printer control board (PRCB)
- FNS control board (FNSCB)
Correction
Note
- The message "Please call service" is displayed on the panel.
Solution
- Turn OFF the sub power switch, and then turn OFF the main power switch. Then unplug all the power plug. Restart the main body after 10 seconds.
- Check the connector connection and the wiring between the main body and each option, and repair it when there is any abnormality.
- FS-532: Check the connector connection of FNSCB, and repair it when there is any abnormality.
- OT-512: Check the connector connection of FNSCB, and repair it when there is any abnormality.
- Rewrite the firmware of the option.
- Replace the control board of the option corresponds to the malfunction code.
Faulty part isolation DIPSW
Control during the detachment