Error Code: C-1158 Follow

Code

C-1158

Classification

FS: FS-532 abnormality

Cause

After the roller pressure motor (M110) becomes active, the roller pressure motor home sensor (PS110) does not become active within a specified period of time.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• FNS control board (FNSCB)
• Roller pressure motor (M110)
• Roller pressure motor home sensor (PS110)

Correction

Press the help key to activate and deactivate the sub power switch (SW2) of the main body.

Note

• When you isolate the faulty part, the limited use is available.
• The message "Please call service" and "Press [Help] to disengage" are displayed alternately on the touch panel.
• When you press the help key, the message "Please turn on power again" is displayed on the touch panel.

Solution

1. Check the connector connection between FNSCB and M110, CN35 of FNSCB, CN135 (Relay connector), CN123 of M110, and the wiring. Then repair it when there is any abnormality.
2. Check the connector connection between FNSCB and PS110, CN45 of FNSCB, CN194 (Relay connector), CN174 of PS110, and the wiring. Then repair it when there is any abnormality.
3. Check the IO Check (72-38) of M110 and the coupling of the gear, and repair it when there is any abnormality.
4. Check the IO Check (72-31) of PS110 or the operation, and repair it when there is any abnormality.
5. Replace PS110.
6. Replace M110.
7. Replace FNSCB.

Faulty part isolation DIPSW

DIPSW6-3

Control during the detachment

The use of the staple is unavailable