Error Code: C-1480 Follow

Code

C-1480

Classification

Main body: Charging control unit abnormality

Cause

The error detection signal is detected continuously for a specified period of time during output with high voltage source.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• High voltage unit/3 (HV3)

Correction

Press the help key to activate and deactivate the sub power switch (SW2) of the main body.

Note

• When you isolate the faulty part, the limited use is available.
• The message "Please call service" and "Press [Help] to disengage" are displayed alternately on the touch panel.
• When you press the help key, the message "Please turn on power again" is displayed on the touch panel.

Solution

1. Check the connection of the high voltage contact of HV3, and clean or repair it when there is any abnormality.
2. Check the neutralizing parts, and clean or replace them if there is a dirt or any abnormality.
3. Check the connector connection between HV3 and the downstream option, and the wiring. Then repair it when there is any abnormality.

Faulty part isolation DIPSW

DIPSW35-7

Control during the detachment

High voltage power of the electric charge control unit is unavailable.