Error Code: C-2213 Follow

Code

C-2213

Classification

Main body: Drum motor/C abnormality

Cause

When the drum motor/C (M3) is active, an error detection signal of M3 is detected continuously for a specified period of time.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• Printer control board (PRCB)
• Drum motor/C (M3)
• Encoder sensor/C1 (PS57), Encoder sensor/C2 (PS56)
• DC power supply/2 (DCPS2) (AC57V130##, AC58V130## (C4070: Japan))
• Drum unit/C
• Drum encoder/C

Correction

Note

• The message "Please call service" is displayed on the panel.

Solution

1. Check the drum unit and repair or replace it when there is any abnormality
2. Check the connector connection between PRCB, and M3 and PS56, PS57, and the wiring. Then repair it when there is any abnormality.
3. Check the IO Check (41-10) of the M3 and the coupling of the gear, and repair or replace it when there is any abnormality. (Wiring diagram: Main body (2/5): 16-N)
4. Check the connector connection between DCPS2 and PRCB, and the wiring. Then repair it when there is any abnormality.
5. Check the skew, the status of the slit, damage, dust of the drum encoder. Repair or replace it when there is any abnormality.
6. Replace PS56 and PS57.
7. Replace M3.
8. Replace PRCB.
9. Replace DCPS2.

Faulty part isolation DIPSW

Control during the detachment