Error Code: C-2223 Follow

Code

C-2223

Classification

Main body: Low drum load torque abnormality

Cause

Within a specified period of time after the low load torque recovery control of the drum motor/Y (M1), the drum motor/M (M2), the drum motor/C (M3), the drum motor/K (M4) starts, either of the torque is not recovered.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• Drum motor/Y (M1)
• Drum motor/M (M2)
• Drum motor/C (M3)
• Drum motor/K (M4)
• Printer control board (PRCB)

Correction

Note

• The message "Please call service" is displayed on the panel.

Solution

1. Check the drum unit, and repair it when there is any abnormality.
2. Check the connector connection between PRCB and M1, M2, M3, M4, and the wiring. Then repair it when there is any abnormality.
3. Check IO Check (41-00) and others of M1, IO Check (41-05) and others of M2, IO Check (41-10) and others of M3, IO Check (41-15) and others of M4 and the coupling of the gear, and repair or replace it when there is any abnormality. (Wiring diagram: Main body (2/5):15-N, 15-N, 16-N)
4. Replace M1, M2, M3 or M4.
5. Replace PRCB.

Faulty part isolation DIPSW

Control during the detachment