Error Code: C-2404 Follow
Code
C-2404
Classification
Main body: Erase lamp/K abnormality
Cause
It cannot be detected that the erase lamp/K (EL3) is installed.
Measures to take when an alert occurs
The main body and the option stop immediately.
Estimated abnormal parts
- Printer control board (PRCB)
- Erase lamp/K (EL3)
Correction
Note
- The message "Please call service" is displayed on the panel.
Solution
- Check that the process unit is correctly installed without looseness, and reinstall or repair it when there is any abnormality.
- Check the EL3 section, and clean or repair it when there is any abnormality. (Wiring diagram: Main body (2/5): 22-E)
- Check the connector connection between PRCB and EL3, and the wiring. Then repair it when there is any abnormality.
- Replace EL3.
- Replace PRCB.
- Replace EL3 and PRCB at the same time.
Faulty part isolation DIPSW
Control during the detachment