Error Code: C-47A2 Follow

Code

C-47A2

Classification

Main body: Expansion preparation abnormality

Cause

When the expansion preparation from the memory to the printer is completed, mPVV becomes active.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• Wiring (AC57N104)
• Image processing board (IPB)
• Printer control board (PRCB)

Correction

Deactivate and activate the sub power switch (SW2) of the main body.

Note

• The message "Please turn on power again" is displayed on the touch panel.

Solution

1. Execute the IO Check (99-70) of the board self-diagnosis. Check the results of IPB.
   • When the results are OK: Go on to the following steps.
   • When the result is NG: There is an abnormality in IPB or the connection. Go on to the step 5.
2. Prior check
   • Check that the CN5402 of IPB is correctly connected.
3. Check the connector connection between PRCB and IPB, CN107 of PRCB, and the wiring. Then repair it when there is any abnormality.
4. Replace the wiring.
5. Replace IPB.
6. Replace PRCB.

Faulty part isolation DIPSW

Control during the detachment