Error Code: C-5017 Follow

Code

C-5017

Classification

Main body: PF system control circuit motor output 2 communication abnormality

Cause

PF system control circuit motor output communication abnormality.

A checksum error occurs in a data that is sent to the control circuit.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• PF drive board (PFDB, PFUDB)
• Printer control board (PRCB)

Correction

Note

• The message "Please call service" is displayed on the panel.

Solution

1. Check the connector connection between the main body and PF, and the wiring. Then repair it when there is any abnormality.
2. PF-602m: Check the connector connection between PFDB and PRCB, and the wiring. Then repair it when there is any abnormality.
3. PF-707m: Check the connector connection between PFUDB and PRCB, and the wiring. Then repair it when there is any abnormality.
3. PF-602m: Replace PFDB.
4. PF-707m: Replace PFUDB.
4. Replace PRCB.

Faulty part isolation DIPSW

Control during the detachment