Error Code: C-6703 Follow

Code

C-6703

Classification

Main body: Image processing

Cause

After the negation of SVV, the compression of read images and their development into the page memory are not terminated within a specified period of time.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• Image processing board (IPB)
• Overall control board (OACB)
• Printer control board (PRCB)
• CCD board (CCDB)

Correction

Deactivate and activate the sub power switch (SW2) of the main body.

Note

• The message "Please turn on power again" is displayed on the touch panel.

Solution

1. Perform the IO Check (99-70) and check if there is a problem with IPB.
   • When the results are abnormal, perform solution 2 and solution 4.
   • When the results are normal, perform following solutions other than solution 4.
2. Check the connector connection between IPB and OACB, between IPB and PRCB, and between IPB and CCDB, and the wiring. Then repair it when there is any abnormality.
3. Replace CCDB.
4. Replace IPB.
5. Replace OACB.
6. Replace PRCB.

Faulty part isolation DIPSW

Control during the detachment