Menu

Error Code: C-7115 Follow

Avatar
Ohji Miranda

Code

C-7115

Classification

Main body: Printer control board ICP blowout

Cause

When a specified period of time elapses after the power becomes active, an error detection signal of ICP24 is detected continuously for a specified period of time.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

  • Printer control board (PRCB)

Correction

Note

  • The message "Please turn on power again" is displayed on the touch panel.

Solution

  1. Check the connector connection between PRCB and the tacking fan/1 (FM19), CN116 of PRCB, CN273 (Relay connector), CN259 of FM19, and the wiring. Then repair it when there is any abnormality.
  2. Check the connector connection between PRCB and the tacking fan/3 (FM21), CN116 of PRCB, CN273 (Relay connector), CN257 of FM21, and the wiring. Then repair it when there is any abnormality.
  3. Replace PRCB.

Faulty part isolation DIPSW

Control during the detachment

Articles in this section

See more