Error Code: C-7204 Follow

Code

C-7204

Classification

Main body: Conveyance drive board ICP blowout

Cause

When a specified period of time elapses after the power becomes active, an error detection signal of ICP3 is detected continuously for a specified period of time.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• Conveyance drive board (CDB)

Correction

Note

• The message "Please turn on power again" is displayed on the touch panel.

Solution

1. Check the connector connection between CDB and the decurler motor (M44), CN170 of CDB, CN444 of M44, and the wiring. Then repair it when there is any abnormality.
2. Replace CDB.

Faulty part isolation DIPSW

Control during the detachment