Error Code: C-8103 Follow

Code

C-8103

Classification

DF: DF lift-up motor abnormality (Up)

Cause

Within a specified period of time after the DF lift-up motor (M5) rotates forward, the DF lift-up upper limit sensor (PS2) does not become active.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• DF lift-up upper limit sensor (PS2)
• DF lift-up motor (M5)
• DF control board (DFCB)

Correction

Note

• The message "Please call service" is displayed on the panel.

Solution

1. Check the original feed section, and repair it when there is any abnormality.
2. Check the connector connection between PS2 or M5 and DFCB, and the wiring. Then repair it when there is any abnormality.
3. Check the drive or coupling of the gear of M5, and repair it when there is any abnormality. (Wiring diagram: DF: 5-C)
4. Check PS2, and repair it when there is any abnormality. (Wiring diagram: DF: 7-I)
5. Replace PS2.
6. Replace M5.
7. Replace DFCB.

Faulty part isolation DIPSW

Control during the detachment