Error Code: C-D080 Follow
Code
C-D080
Classification
Main body: SSD file corruption
Cause
Files in the SSD are corrupted.
Measures to take when an alert occurs
The main body and the option stop immediately.
Estimated abnormal parts
- SSD (SSD)
- Overall control board (OACB)
Correction
Press the help key to deactivate and activate the sub power switch (SW2) of the main body.
Note
- When you isolate the faulty part, the limited use is available.
- The message "Please call service" and "Press [Help] to disengage" are displayed alternately on the touch panel.
- When you press the help key, the message "Please turn on power again" is displayed on the touch panel.
Solution
- Execute the IO Check (99-03) of the auto correction for the broken files in SSD.
- Execute the IO Check (99-70) of the board self-diagnosis. Check the results of SSD.
- When the results are OK: Go on to the step 5.
- When the results are NG: There is an abnormality in SSD or the connection. Go on to the following steps, and check SSD connection.
- Check the connector connection between OACB and SSD, and CN302 of OACB. Then repair it when there is any abnormality.
- Check the connector connection between the image processing board (IPB) and OACB, CN201 of IPB, CN1001 of OACB. Then repair it when there is any abnormality.
- Conduct the Format SSD All Data. (Refer to Format SSD All Data)
- Replace OACB and SSD. (Refer to Overall control board (OACB), SSD (SSD))
Faulty part isolation DIPSW
Control during the detachment