Error Code: C-0235 Follow

Code

C-0235

Classification

Main body: Motor abnormality

Cause

Within a specified period of time after the registration roller pressure release motor (M31) starts returning to the home position, the registration roller pressure release home sensor (PS3) does not become active.

Measures to take when an alert occurs

The main body and the option stop immediately.

Estimated abnormal parts

• Conveyance drive board (CDB)
• Printer control board (PRCB)
• Registration roller pressure release motor (M31)
• Registration roller pressure release home sensor (PS3)

Correction

Note

• The message "Please call service" is displayed on the panel.

Solution

1. Check that the front door is closed properly, and repair it when there is any abnormality.
2. Check the registration section, and repair it when there is any abnormality.
3. Check the drive gear system in the registration section, and repair it when there is any abnormality.
4. Check the connector connection between PRCB and M31, and the wiring. Then repair it when there is any abnormality.
5. Check the connector connection between CDB and PS3, and the wiring. Then repair it when there is any abnormality.
6. Check the connector connection between CDB and PRCB, and the wiring. Then repair it when there is any abnormality.
7. Check the IO Check (86-15) and others of M31 or the coupling of the gear, and repair it when there is any abnormality. (Wiring diagram: Main body (2/5): 5-J)
8. Check IO Check (86-15) and others and the operation of PS3, and repair it when there is any abnormality. (Wiring diagram: Main body (1/5): 14-O)
9. Replace PS3.
10. Replace M31.
11. Replace CDB.
12. Replace PRCB.
13. Replace M31 and CDB at a time.

Faulty part isolation DIPSW

Control during the detachment